Small Tools >FSCLC_P_E >FSCLP1210R-08E-1/2

Small Tools

FSCLC_P_E
（Dimple Bar）

FSCLP1210R-08E-1/2

Produktinformationen

  • Skalierung an der Seite des Halters sorgt für einfache Einstellung des Halters (Stahlschaft).
  • Ausgezeichneter Vibrationswiderstand durch den leichten Dimple-Kopf.
  • Bessere Spankontrolle/-abfuhr durch zusätzlichen Spankanal.
  • Verwendet positive WSP 5°,7°,11°.
  • l/d ist 3- bis 5-facher Durchmesser (Hartmetallschaft ist 7 bis 8facher Durchmesser).

The actual product may differ from the displayed image.
For details, please check the dimensions below.

Art   [Ausbreiten ]

Art   [Ausbreiten ]

Durchmesser (Unit)
Metric Inch
mm in
microns * microinches *
N lbf
deg deg
MPa psi
N/m lbf/in
Nm lbf-in
kg lbs
rpm rpm

* Only ADJAR,ADJRR
Hand R
Lager
Längeneinheit M
DMIN 12
DCON 10
KAPR 95°
LF 80
LDRED 16
WF 6
H 9
GAMF 5
RE 0.4
Peripheral effective cutting edge count: ZEFP 1
WSP-Nummer CP__0802
2D Modell (DXF)
CAD Dateiname Download
FSCLP1210R-08E-1-2
CAD
Disclaimer
Be sure to read the following before downloading the data or file you selected. Please understand that if you decide to proceed with the next step it will be at your own discretion and responsibility.


As far as allowed by law, Mitsubishi Materials Corporation shall not be held responsible in any way, either manifest or implied, including but not limited to legal warranty against defects, warranty of merchantability, warranty of fitness for a special purpose, or warranty against infringement of rights.Therefore, in the event that the above-stated download of the selected data or file results in the customer suffering a loss of data or damage to a computer or system, Mitsubishi Materials Corporation shall not be held in anyway responsible for said loss or damage. Further, the contents, including data and files, may be modified or terminated without notice, and Mitsubishi Materials Corporation does not warranty that any posted contents are error free.


If you agree to this disclaimer, please select “Agree” below.
Thank you for your understanding and cooperation.

3D Detailliertes Modell (STP,STL)
CAD Dateiname Download
FSCLP1210R-08E-1-2
CAD
Disclaimer
Be sure to read the following before downloading the data or file you selected. Please understand that if you decide to proceed with the next step it will be at your own discretion and responsibility.


As far as allowed by law, Mitsubishi Materials Corporation shall not be held responsible in any way, either manifest or implied, including but not limited to legal warranty against defects, warranty of merchantability, warranty of fitness for a special purpose, or warranty against infringement of rights.Therefore, in the event that the above-stated download of the selected data or file results in the customer suffering a loss of data or damage to a computer or system, Mitsubishi Materials Corporation shall not be held in anyway responsible for said loss or damage. Further, the contents, including data and files, may be modified or terminated without notice, and Mitsubishi Materials Corporation does not warranty that any posted contents are error free.


If you agree to this disclaimer, please select “Agree” below.
Thank you for your understanding and cooperation.

3D Einfaches Modell (STP,STL)
CAD Dateiname RE Download
FSCLP1210R-08E-1-2_MR0_4
0.4 CAD
Disclaimer
Be sure to read the following before downloading the data or file you selected. Please understand that if you decide to proceed with the next step it will be at your own discretion and responsibility.


As far as allowed by law, Mitsubishi Materials Corporation shall not be held responsible in any way, either manifest or implied, including but not limited to legal warranty against defects, warranty of merchantability, warranty of fitness for a special purpose, or warranty against infringement of rights.Therefore, in the event that the above-stated download of the selected data or file results in the customer suffering a loss of data or damage to a computer or system, Mitsubishi Materials Corporation shall not be held in anyway responsible for said loss or damage. Further, the contents, including data and files, may be modified or terminated without notice, and Mitsubishi Materials Corporation does not warranty that any posted contents are error free.


If you agree to this disclaimer, please select “Agree” below.
Thank you for your understanding and cooperation.

Lager

:Lagerstandard
:Kein Standard, Herstellung nur auf Anfrage.
:Lagerstandard Wird durch neue Produkte ersetzt.
:Lagerstandard in Japan.

  • Empfohlene Schnittmethode

  • WSP Drehen

  • Ersatzteile

Seitenanfang

Im Einklang mit der europäischen DSGVO verwendet diese Webseite technisch notwendige und funktionelle Cookies, um das Nutzererlebnis stetig zu verbessern und die Sitzung des Besuchs zu speichern. Mit Ihrer Zustimmung akzeptieren Sie Cookies und unsere Datenschutz .