Boring

BoringClassification

Shape Series Tooling Sheet Feature
C
  • it covers a wide cutting range (threading, grooving copying, etc.).
  • SOLID CARBIDE
  • l/d is 5 times the diameter.
  • Cutting edge can be shaped according to the application.
CB
  • Solid carbide type with 2 cutting edges.
  • Continuous turning from internal turning to face turning.
  • Each boring bar comes in two types, with or without breaker.
CR
  • Each boring bar comes in two types, with or without breaker.
  • Solid carbide type with 2 cutting edges.
  • Continuous turning from internal turning to face turning.
C_SCLC
  • Carbide shank
  • Screw-on type
  • 7°positive insert.
C_SCLC_C_C
  • WITH COOLANT HOLE
  • Screw-on type
C_SCLP_C_C
  • WITH COOLANT HOLE
  • Screw-on type
C_SDQC_C_C
  • WITH COOLANT HOLE
  • Screw-on type
C_SDUC_C_C
  • WITH COOLANT HOLE
  • Screw-on type
C_STUC
  • Carbide shank
  • Screw-on type
  • 7°positive insert.
C_STUC_C_C
  • WITH COOLANT HOLE
  • Screw-on type
C_STUP_C_C
  • WITH COOLANT HOLE
  • Screw-on type
C_SWUC
  • Carbide shank
  • Screw-on type
  • 7°positive insert.
C_SWUC_C_C
  • WITH COOLANT HOLE
  • Screw-on type
DCLN
  • Economical negative insert.
  • New double clamp type.
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
DDUN
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
  • New double clamp type.
  • Economical negative insert.
DSKN
  • New double clamp type.
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
  • Economical negative insert.
DTFN
  • New double clamp type.
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
  • Economical negative insert.
DVUN
  • Holds inserts securely.
  • New double clamp type.
  • Excellent cutting edge repeatability.
  • Economical negative insert.
DWLN
  • New double clamp type.
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
  • Economical negative insert.
FCTU1
  • 11°positive insert.
  • Screw-on type/Clamp-on type
  • l/d is 3 to 5 times the diameter.
  • 7°positive insert.
FCTU2_C
  • 11°positive insert.
  • Screw-on type/Clamp-on type
  • 7°positive insert.
  • l/d is 3 to 5 times the diameter.
FSCLC_P
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
FSCLC_P_A
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
FSCLC_P_E
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • Employs positive insert 5°,7°,11°.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
FSDQC_A
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
FSDQC_E
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Chip disposal is improved by having two channels for chip evacuation.
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
FSDUC
  • Employs positive insert 5°,7°,11°.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
FSDUC_A
  • Employs positive insert 5°,7°,11°.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
FSDUC_E
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
FSTU1
  • 11°positive insert.
  • Screw-on type/Clamp-on type
  • l/d is 3 to 5 times the diameter.
FSTU2_C
  • 11°positive insert.
  • Screw-on type/Clamp-on type
  • l/d is 3 to 5 times the diameter.
FSTUP_A
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
FSTUP_E
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
FSVJB_C
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Employs positive insert 5°,7°,11°.
FSVPB_C
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
FSVPB_C_A
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
FSVUB_C
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Employs positive insert 5°,7°,11°.
FSVUB_C_A
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
  • Employs positive insert 5°,7°,11°.
FSWL1
  • 7°positive insert.
  • 11°positive insert.
  • l/d is 3 to 5 times the diameter.
  • Screw-on type/Clamp-on type
FSWL2_C
  • 11°positive insert.
  • 7°positive insert.
  • l/d is 3 to 5 times the diameter.
  • Screw-on type/Clamp-on type
FSWUB_P_A
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
FSWUB_P_E
  • Employs positive insert 5°,7°,11°.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 5 times the diameter (Carbide shank is 7 to 8 times the diameter).
PCLN
  • Economical negative insert.
  • Lever lock type.
  • l/d is 3 times the diameter.
  • ISO standard.
PDQN
  • Lever lock type.
  • l/d is 3 times the diameter.
  • Economical negative insert.
  • ISO standard.
PDUN
  • Economical negative insert.
  • Lever lock type.
  • l/d is 3 times the diameter.
  • ISO standard.
PDZN
  • l/d is 3 times the diameter.
  • ISO standard.
  • Economical negative insert.
  • Lever lock type.
PSKN
  • Lever lock type.
  • l/d is 3 times the diameter.
  • ISO standard.
  • Economical negative insert.
PTFN
  • ISO standard.
  • Economical negative insert.
  • Lever lock type.
  • l/d is 3 times the diameter.
PWLN
  • ISO standard.
  • Economical negative insert.
  • Lever lock type.
  • l/d is 3 times the diameter.
SCLC_C
  • 7°positive insert.
  • Carbide shank
  • Easy-to-use tool geometries.
  • The most suitable for machining of small parts
  • l/d is 5 times the diameter.
STFE
  • Suitable for non-ferrous metal.
  • 20°positive insert.
  • Screw-on type
  • l/d is 6 times the diameter.
  • Excellent vibration resistance.
STUC_C
  • 7°positive insert.
  • Carbide shank
  • Easy-to-use tool geometries.
  • The most suitable for machining of small parts
  • l/d is 5 times the diameter.
SWUB_C
  • 7°positive insert.
  • Carbide shank
  • Easy-to-use tool geometries.
  • The most suitable for machining of small parts
  • l/d is 5 times the diameter.
S_SCLC
  • Screw-on type
  • ISO standard.
  • 7°positive insert.
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SCLC_C
  • 7°positive insert.
  • Screw-on type
  • ISO standard.
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SCLC_C_S
  • WITH COOLANT HOLE
  • Screw-on type
S_SCLP_C_S
  • WITH COOLANT HOLE
  • Screw-on type
S_SCZC
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SDQC
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SDQC_C
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SDQC_C_S
  • WITH COOLANT HOLE
  • Screw-on type
S_SDUC
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SDUC_C
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SDUC_C_S
  • WITH COOLANT HOLE
  • Screw-on type
S_SSKC
  • 7°positive insert.
  • Screw-on type
  • ISO standard.
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_STFC
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_STFC_C
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_STUC_C_S
  • WITH COOLANT HOLE
  • Screw-on type
S_STUP_C_S
  • WITH COOLANT HOLE
  • Screw-on type
S_SVQC
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SVQC_C
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SVUC
  • ISO standard.
  • 7°positive insert.
  • Screw-on type
  • l/d is 3 to 5 times the diameter (up to 7 times with the carbide shank).
S_SWUC_C_S
  • WITH COOLANT HOLE
  • Screw-on type

This website uses cookies in order to improve your experience and keep your session. By clicking on the 'I understand and accept' button on this page you consent the usage of cookies and accept our Privacy Policy .