Outils de décolletage

FSDQC_A
（Barre d’alésage）

FSDQC1612L-07A

Information Produit

  • Utilise des plaquettes amovibles positives 5°,7°,11°.
  • Tête d’alésaget légère pour une résistance élevée aux vibrations.
  • Deux canaux d’arrosage pour améliorer l’évacuation des copeaux.
  • Porte-outil gradué sur le côté pour un réglage aisé (corps en acier).
  • Rapport l/d équivalent à 3 - 5 fois le diamètre (7 - 8 fois le diamètre pour la queue du foret carbure).

The actual product may differ from the displayed image.
For details, please check the dimensions below.

Type   [Agrandir ]

Type   [Agrandir ]

Diamètre (Unit)
Metric Inch
mm in
microns * microinches *
N lbf
deg deg
MPa psi
N/m lbf/in
Nm lbf-in
kg lbs
rpm rpm

* Only ADJAR,ADJRR
Direction du P.O. L
Stock
Unité de longueur M
DMIN 16
DCON 12
KAPR 107.5°
LF 150
LDRED 22.5
WF 8.6
H 11
WF2 2.6
GAMF 6
RE 0.4
Peripheral effective cutting edge count: ZEFP 1
Numéro plaquette DC__0702
2D Modèle (DXF)
Nom du fichier Télécharger
FSDQC1612L-07A
CAD
Disclaimer
Be sure to read the following before downloading the data or file you selected. Please understand that if you decide to proceed with the next step it will be at your own discretion and responsibility.


As far as allowed by law, Mitsubishi Materials Corporation shall not be held responsible in any way, either manifest or implied, including but not limited to legal warranty against defects, warranty of merchantability, warranty of fitness for a special purpose, or warranty against infringement of rights.Therefore, in the event that the above-stated download of the selected data or file results in the customer suffering a loss of data or damage to a computer or system, Mitsubishi Materials Corporation shall not be held in anyway responsible for said loss or damage. Further, the contents, including data and files, may be modified or terminated without notice, and Mitsubishi Materials Corporation does not warranty that any posted contents are error free.


If you agree to this disclaimer, please select “Agree” below.
Thank you for your understanding and cooperation.

3D Modèle détaillé (STP,STL)
Nom du fichier Télécharger
FSDQC1612L-07A
CAD
Disclaimer
Be sure to read the following before downloading the data or file you selected. Please understand that if you decide to proceed with the next step it will be at your own discretion and responsibility.


As far as allowed by law, Mitsubishi Materials Corporation shall not be held responsible in any way, either manifest or implied, including but not limited to legal warranty against defects, warranty of merchantability, warranty of fitness for a special purpose, or warranty against infringement of rights.Therefore, in the event that the above-stated download of the selected data or file results in the customer suffering a loss of data or damage to a computer or system, Mitsubishi Materials Corporation shall not be held in anyway responsible for said loss or damage. Further, the contents, including data and files, may be modified or terminated without notice, and Mitsubishi Materials Corporation does not warranty that any posted contents are error free.


If you agree to this disclaimer, please select “Agree” below.
Thank you for your understanding and cooperation.

3D Modèle simplifié (STP,STL)
Nom du fichier RE Télécharger
FSDQC1612L-07A_MR0_4
0.4 CAD
Disclaimer
Be sure to read the following before downloading the data or file you selected. Please understand that if you decide to proceed with the next step it will be at your own discretion and responsibility.


As far as allowed by law, Mitsubishi Materials Corporation shall not be held responsible in any way, either manifest or implied, including but not limited to legal warranty against defects, warranty of merchantability, warranty of fitness for a special purpose, or warranty against infringement of rights.Therefore, in the event that the above-stated download of the selected data or file results in the customer suffering a loss of data or damage to a computer or system, Mitsubishi Materials Corporation shall not be held in anyway responsible for said loss or damage. Further, the contents, including data and files, may be modified or terminated without notice, and Mitsubishi Materials Corporation does not warranty that any posted contents are error free.


If you agree to this disclaimer, please select “Agree” below.
Thank you for your understanding and cooperation.
Show more

Stock

:Article standard stocké en Europe.
:Pas de stock, produit sur commande uniquement.
:Article standard stocké. Destiné à être remplacé par de nouveaux produits.
:Article standard stocké au Japon.

  • Condition de coupe recommandée

  • Plaquettes de tournage

  • Pièces détachées

Retour en haut de la page

Ce site web est conforme au règlement européen GDPR et utilise des cookies techniques et fonctionnels afin d'améliorer votre expérience et d'enregistrer votre session. En cliquant sur le bouton "Accepter" de cette page, vous consentez à l'utilisation de cookies et acceptez notre politique de cookies et de protection des données .