钻头 > GWSL

钻头

GWSL
（G型非步进长直柄钻头）

  • Disclaimer
    Be sure to read the following before downloading the data or file you selected. Please understand that if you decide to proceed with the next step it will be at your own discretion and responsibility.


    As far as allowed by law, Mitsubishi Materials Corporation shall not be held responsible in any way, either manifest or implied, including but not limited to legal warranty against defects, warranty of merchantability, warranty of fitness for a special purpose, or warranty against infringement of rights.Therefore, in the event that the above-stated download of the selected data or file results in the customer suffering a loss of data or damage to a computer or system, Mitsubishi Materials Corporation shall not be held in anyway responsible for said loss or damage. Further, the contents, including data and files, may be modified or terminated without notice, and Mitsubishi Materials Corporation does not warranty that any posted contents are error free.


    If you agree to this disclaimer, please select “Agree” below.
    Thank you for your understanding and cooperation.

  • 最适于钻削深孔。可有效地钻削比G-WSS型钻头更深的孔。

实际产品与显示图像存在不一致情况，敬请留意。

图1 [放大]

  1 2 3 4 5 6 7 8   
型号 图 CAD 冷却方式 切削方向 材料分类名称 材料名称 库存
GWSLD0200A125 图1 外部    
GWSLD0200A160 图1 外部    
GWSLD0210A125 图1 外部    
GWSLD0210A160 图1 外部    
GWSLD0220A125 图1 外部    
GWSLD0220A160 图1 外部    
GWSLD0230A125 图1 外部    
GWSLD0230A160 图1 外部    
GWSLD0240A125 图1 外部    
GWSLD0240A160 图1 外部    
GWSLD0250A125 图1 外部    
GWSLD0250A160 图1 外部    
GWSLD0260A125 图1 外部    
GWSLD0260A160 图1 外部    
GWSLD0270A125 图1 外部    
GWSLD0270A160 图1 外部    
GWSLD0280A125 图1 外部    
GWSLD0280A160 图1 外部    
GWSLD0290A125 图1 外部    
GWSLD0290A160 图1 外部    
D1 IC DMIN CUTDIA DAXX DC DC1 DC2 ld LU BHTA BHTA1 BHTA2 BHTA3 BHTA4 BHTA5 SIG SIG1 SIG2 L3 LBB CDX L20 LDRED L15 LCF L2 LH L19 LPR L1 L L24 FLGT LF CBDP OAL D4 DCON D2 DCX D5 DN DCSFMS BD BD1 BD2 BD3 BD4 BD5 D8 DAH DAH1 DAH2 DCCB CNT D9 B L7 LCCB L8 L9 HBKW LS H1 H H2 HF HBH W1 KWW F1 WF BS S1 WF2 S4 S Z2 PDY PDX ap APMX HTB DCN CDI DCINX BDX CWX LBX RR GAMF GAMO LAMS ALF FHA KRINS STA WT R PRFRAD RE RE1 RE2 RE3 LTA LBYD KWL Cutting item count: CICT Peripheral effective cutting edge count: ZEFP Face effective cutting edge count: ZEFF Effective Cutting Edge 断屑槽 产品用途 本体 模块 对应刀片 DBC DBC1 DBC2 DBC3 DCONWS DCONMS KAPR KAPR1 KAPR2 LB LB1 LB2 LB3 LB4 LB5 LE LE1 LE2 LE3 TX1 TX2 TX3
2 76.6 118° 80.6 125 125.6 2 2  
2 96.6 118° 100.6 160 160.6 2 2  
2.1 76.4 118° 80.6 125 125.6 2.1 2  
2.1 96.4 118° 100.6 160 160.6 2.1 2  
2.2 76.3 118° 80.7 125 125.7 2.2 2  
2.2 96.3 118° 100.7 160 160.7 2.2 2  
2.3 76.1 118° 80.7 125 125.7 2.3 2  
2.3 96.1 118° 100.7 160 160.7 2.3 2  
2.4 75.9 118° 80.7 125 125.7 2.4 2  
2.4 95.9 118° 100.7 160 160.7 2.4 2  
2.5 75.8 118° 80.8 125 125.8 2.5 2  
2.5 95.8 118° 100.8 160 160.8 2.5 2  
2.6 75.6 118° 80.8 125 125.8 2.6 2  
2.6 95.6 118° 100.8 160 160.8 2.6 2  
2.7 75.4 118° 80.8 125 125.8 2.7 2  
2.7 95.4 118° 100.8 160 160.8 2.7 2  
2.8 75.2 118° 80.8 125 125.8 2.8 2  
2.8 95.2 118° 100.8 160 160.8 2.8 2  
2.9 75.1 118° 80.9 125 125.9 2.9 2  
2.9 95.1 118° 100.9 160 160.9 2.9 2  
  1 2 3 4 5 6 7 8   

库存

:标准库存品
:预订生产品
:目前为标准库存品，但将来会被新产品替换的产品
:特定代理店库存品

  • 推荐切削条件

返回页面顶部

点击本页上的“同意”按钮，即表示您同意使用cookies并接受我们的隐私政策。 本网站使用cookies来改善网站，提高顾客的使用体验，分析网站的使用状况，以便于我司的市场工作。详情请看《 个人信息保护方针 》。