CERMET
- NX2525 for high speed milling.
- NX4545 for general milling.
Micro-Structure of
NX2525
Micro-Structure of
NX4545
- NX2525 has high hardened Ti compound particles within it's microstructure therefore the grade has both excellent wear and fracture resistance properties.
- NX4545 uses a special alloy for the binder material therefore the grade has high fracture resistance properties.
SELECTION STANDARD
MILLING
- Note)
- For wet cutting of steel, please use coated carbide F7030. For wet cutting of cast iron, please use coated carbide MC5020.
CUTTING PERFORMANCE
GRADE CHARACTERISTICS
Grade |
ASX445R16007F |
Hardness (HRA) |
T.R.S. (GPa) |
Thermal Conductivity
(W/m·K) * |
Thermal Expansion
(x 10-6/K) |
NX2525 |
92.2 |
2.0 |
33 |
7.8 |
NX4545 |
90.0 |
2.2 |
33 |
7.8 |
*1GPa=102kg/mm
2, 1W/m • K=2.39×10
-3cal/cm • sec • ℃