FUNCTION OF TOOL FEATURES FOR FACE MILLING
CORNER ANGLE (CH) AND CUTTING CHARACTERISTICS
Corner Angle
0° |
Back force is in the minus direction. Lifts the workpiece when workpiece clamp rigidity is low. |
|
Corner Angle
15° |
Corner angle 15° is recommended for face milling of workpieces with low rigidity such as thin workpieces. |
|
Corner Angle
45° |
The largest back force.
Bends thin workpieces and lowers cutting accuracy.
*Prevents workpiece edge chipping when cast iron cutting. |
|
|
- *Principal force :
- Force is in the opposite direction of face milling rotation.
- *Back force :
- Force that pushes in the axial direction.
- *Feed force :
- Force is in the feed direction and is caused by table feed.